Tips For Replacing a Window Handle
It is simple to change your window handle in the convenience of your own home. Follow these guidelines to ensure an elegant and smooth finish.
Start by removing the screws to reveal the screws within your uPVC window handle. Measure the spindle to make sure you’re getting the right size replacement.
1. Take a measurement of the Spindle Length
When replacing a window handle it’s important to determine the dimensions of the spindle right. It can affect the tightness or elasticity of the handle and whether the handle will lock properly into the frame of the window. The spindle is the steel shaft that connects the handle as well as the lock in the frame of the window. The spindle is available in either the standard cross-section of 8mm for industry or the older versions of 9mm. Modern industry standards are 8mm but it wasn’t always this way. It is important to check the measurements when purchasing a new handle.
Remove the handle. This is easily done by turning the handle into the open position and taking off two screws that keep the handle in place (which are usually hidden behind plastic caps which must be removed). Once removed take a measurement from the base of the handle to the end of the spindle. This will give you the measurement needed to purchase a replacement handles for upvc windows.
There are a lot of options when it comes to choosing a new window handle, from sleek chrome that can fit in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail latches! There are a lot of options, but the most important thing is to select one that complements your home.
Espag handles are commonly used to uPVC window frames and are always the exact same size, with a 43mm centre. Cockspur handles are available in a variety of sizes, from 58mm up to 62mm. Cadenza window handles have a different size due to their angle blade that operates a multi-point lock mechanism inside the window.
When you are choosing a handle for your window, you should also consider the hand you use to open your door. Inline espag window handles are not hand-operated and install can be used on either left or right handed windows. Cranked window handles are only compatible on windows that open in a single direction.
2. Take the handle off
Whether the handle is damaged or just worn out, a window handle that is shattered can be very frustrating. The good news is that you can replace the uPVC handle yourself. You will require only a few basic hand tools and some time to complete the task.
You must first open the window and make sure it’s not locked. The next step is to remove the screws which hold the handle in position. Once the screw caps are removed you will be able to take off the handle.
The handle is connected to a spindle within the window frame. It is held in place by either a screw or pin according to the type of handle. The most commonly used handles are the inline Espagnolette and cockspur handles. Both of these kinds of handles are utilized on casement windows, including windows made of aluminium. They can be locked using keys to stop unauthorised opening of the window from outside or you can lock them by turning the handle clockwise.
To remove the handle you will need to use a screwdriver with a flat blade to remove the clip that holds the handle. After the clip has been released, the handle should be able to slide off the spindle. After the handle is removed, you’ll need determine the length of the spindle and make sure that the new handle will fit.
Once you have the right size, you can now screw the new handle in the correct position. It is essential to ensure that the handle is securely fastened and rotates in the correct direction (clockwise when the handle is open, or counterclockwise if the handle is closed). It is also essential to check that it is not fitted upside down.
Finally, you should replace the screw cover caps. Once you’ve completed this step, you are able to test the handle to make sure it’s functioning properly. You should also test the locking mechanism by moving the handle from the locked position, and then returning it to the locked position.
3. Take off the Screws
A uPVC window handle is a crucial element of any home and is often the first item to exhibit signs of wear and tear or damage. This could be due to natural causes, frequent usage, or even deliberate damage by criminals trying to gain access to your home. However, a simple replacement can easily solve the problem and prevent the issue from occurring again.
uPVC handles could also be difficult to remove when the locking mechanisms aren’t functioning properly. It is often possible to fix the issue by replacing the multipoint locking mechanism instead of the entire handle. This can help you save money.
Once you’ve removed the old handle, you’ll have to remove the screws fixing it to the base. These screws are usually located on the inside of the handle’s base. It may be necessary to use a screwdriver to accomplish this. Be careful not to over tighten the handle, as this can cause it to become loose.
Then, you’ll need to find the screws or pins that keep the handle in place. They will likely be located on the inside of the base of the handle and you’ll need a screwdriver or a pair of pliers in order to remove them. If you want to replace them, you should replace the caps on the screws and test the handle to make sure it is working correctly.
Install the handle by adjusting the spindle to the window’s cutout mechanism. Then screw it in. Make sure that the handle is in the open position and that the screws are securely secured prior to replacing the screw covers if you wished to do so. It’s done! You can enjoy your newly installed window handle. This should allow you to avoid costly window and door replacements in the future. Contact us if need more information about this or any other aspect of your uPVC window.
4. Install the New Handle
The replacement of a damaged window handle or updating it is easy and can be completed within only a few simple steps. Identifying the kind of window handle, measuring its spindle length and knowing what tools you’ll need to complete the task are essential. Always ensure safety when working with windows and tools. Make sure you follow the steps and make sure that you have the right handle to use.
The first step is to find the screws that hold your existing window handle in place. Then, remove these, whilst keeping a safe hold on the handle itself to prevent it from falling suddenly and result in injury. Once the screws have been removed, they can be placed in a safe spot to be replaced in the future.
After the handle that was used previously is removed, you can begin to fit your new handle. It is essential that the handle fits perfectly to ensure that it works properly and locks the window in place. Next move the square metal bar attached to the handle into the hole for the window mechanism.
The last step is to replace the screws caps and test the handle to make sure it works. If you’re not satisfied with the results or if the window does not open and close as it should then the next step is to contact our experts who can assist you.
Almost all homes in the UK have uPVC windows. As they are, a lot of them will have to be replaced due to wear or breakage. The procedure is simple and can be done by anyone with a little experience in DIY. The most important factor in the success of the procedure is to ensure that you’re using a replacement double glazing window handles handle that is compatible with your existing window in terms of size and design. Contact us if are unsure about the type of handle you require. They’ll be able to guide you through all the choices.