Car Keys Repair
A bad day at work could quickly become a nightmare once you realize you’ve forgotten your keys at home. It is costly to replace it, but it is also extremely frustrating.
Most car key problems are easily solved. Here are a few common issues that can occur with your car key: The key won’t start when it is turned on.
Keys that are worn out
Over time, keys will wear out. Keys are inserted into and taken out of locks and ignitions on a regular basis which causes them to come into contact with metal. This can cause pits and scratches on the key. They are also carried around in bags and purses throughout the day, causing them bang against other items and fall into hard ground.
The wear and autokeysrus tear may eventually cause a car stop turning in the ignition. This can be extremely painful, Autokeysrus especially if are not able to start your car. You can avoid this by doing a few simple things. You can prevent this by keeping an extra key in your vehicle and ensuring it is cleaned regularly. Also, use lubricants based upon granite to lubricate your key. Make an identical copy of the key you get when it is new. This way, you’ll have another backup in the event that your original key wears out.
Another issue that is common is that the key may not turn due to bending. If this happens, you need to jiggle the gear shift until it is fully in neutral and try again. If the key remains bent, it’s likely time to get a replacement.
Bent key
Sometimes keys to cars break because of normal wear and tear or just a bit of rough usage. If this happens, it can be extremely frustrating, especially if you own a spare key that doesn’t work anymore. If the key is bent, it is not usable and must be replaced immediately. This is because the teeth of a key that are bent don’t match the lock’s teeth and cannot open the vehicle.
The good news is that you can have a locksmith in Aurora arrive and straighten your car keys when it’s not too late. The key could be repaired on the spot, or the manufacturer might need to purchase a new key. It is crucial not to play around with the key in the ignition as this could cause further damage.
This is because the brass in the key is very elastic and can bend easily one way, but won’t reverse the bend in the other. This issue must be resolved by a professional locksmith, so that the key can be used again. It’s also a good idea to have your spare key cut in order to make sure that it works correctly. This can reduce the cost of a new key when it’s time to replace the old one.
Stuck pins or springs
If your car’s key becomes stuck in the lock and cannot turn inside the barrel of the ignition, it is time to replace it. Locksmiths can recut the key in accordance with the original specifications and then use a tool to align the pin head with the spring. This is essential because the re-alignment can ensure that the key is inserted into the lock and the ignition, and will prevent the pins from wearing out or getting stuck.
A standard key can be re-cut by a locksmith or in some instances, at a hardware store, but if your car has more advanced technology (like transponders and chips) it might need to be purchased from the dealer. If you call the dealer, make sure to have your Vehicle Identification number (VIN) ready. They’ll require it to request the replacement key.
You’re packing groceries into your trunk at the end of a long day at work, and you forget your keys. Then you realize you can’t find them. It’s not uncommon for people to order a spare key because they can’t find their original. Locksmiths are especially equipped with the necessary parts and tools needed to repair bent, damaged keys right away.
Ignition socket
There could be an issue with the ignition switch when you’re unable to get your vehicle started or when it suddenly shuts down while driving. If the ignition switch isn’t working, it will stop working. A malfunctioning switch could stop the key from being inserted in the ignition cylinder, or it might not turn on even after the key is inserted. This is the most likely cause of an ignition issue and is the easiest to diagnose.
Modern cars come with an integrated security system that stops the engine from starting unless a specific code is transmitted by the key. If the switch is defective and the key is not working, it will not transmit this code or will instead transmit another. The security system needs to be replaced in this scenario and only a certified mechanic can do this.
Finding the ignition switch can be a little difficult and you’ll need to refer to a vehicle-specific manual in order to determine how to remove the steering wheel and dash panel to get to it. When you remove the steering wheel and dash panel, it’s crucial to not damage the airbag or wiring components. After you have removed these, you can proceed with the replacement of the ignition switch and the cylinder. Make sure you have a new switch and cylinder for the car model and make before you begin.